Thompson metal of Dallas TX can do a variety of custom metal fabrications

Architectural Metals: A Guide for Architects and Designers

Architectural metal can serve several purposes within the same building. It may create a finished exterior appearance, protect roof and wall transitions, manage water, cover exposed edges, or provide a custom feature that cannot be achieved with a standard component. In many cases, the same piece must satisfy several of those requirements at once, making architectural metal as much a performance consideration as a design decision.

For architects and designers, successful architectural metalwork starts well before fabrication. Material, dimensions, profile, finish, joint locations, drainage, and installation conditions can all affect how a component should be designed and produced. Considering these factors early can help preserve the intended appearance while reducing unnecessary seams, difficult field modifications, and other complications during construction.

Since 1962, Thompson-Mathis Metal has worked with architects, contractors, roofing professionals, and commercial construction teams throughout Dallas-Fort Worth and beyond. Our fabrication team produces custom flashing, coping systems, wall and roof panels, gutters, downspouts, scuppers, conductor heads, chimney caps, dormers, cupolas, and other architectural metal components. With specialized fabrication equipment and decades of hands-on sheet metal experience, we turn architectural plans, shop drawings, specifications, sketches, and field measurements into precision-built products.

What Architects and Designers Should Consider When Planning Architectural Metal

Architectural metal should be planned around how a component needs to look, perform, and interact with the rest of the building. Architects must account for building envelope performance, drainage, and connections with surrounding construction, while designers may place greater emphasis on appearance, proportions, material finishes, and how metal components contribute to the overall design.

These considerations are closely connected. A profile that works visually but creates problems with drainage, fabrication, or installation may require changes later in the project. Addressing appearance, performance, and fabrication requirements together helps architects and designers maintain greater control over the finished result.

The following considerations can help establish a clear direction for your architectural metals before details are finalized and sent for fabrication.

Start with the function of the metal.

Many architectural metal components serve as part of the building envelope. Flashing, coping, gravel stops, scuppers, conductor heads, gutters, downspouts, fascia, and edge metal help protect vulnerable areas and manage water, but their effectiveness depends on more than simply covering a joint or creating a finished edge. Dimensions, slope, overlap, transitions, fastening methods, and connections with surrounding materials can all influence performance.

A parapet coping system, for example, provides a finished appearance at the top of a wall while protecting the wall assembly below it. Scuppers and conductor heads may become prominent features on an exterior elevation while carrying water away from a roof. Bringing these functional requirements into the design early helps prevent performance concerns from being addressed only after the profile has been finalized.

Consider how architectural metal contributes to the overall design.

Architectural metal can help establish the lines, proportions, and visual details of a building. Fascia, coping, wall panels, column covers, and other exposed components may be used to create clean transitions, emphasize architectural features, or coordinate with surrounding materials. Profile dimensions, reveals, seam locations, colors, and finishes all affect the finished appearance, particularly across large or highly visible exterior surfaces.

Designers should identify which elements are essential to the intended appearance and communicate those requirements to the fabricator. Some projects call for simple profiles and long, uninterrupted runs, while others require detailed bends, decorative components, or custom shapes. Renovation and restoration work may also require new metal to match existing architectural features. Clearly establishing these priorities helps the fabricator recommend materials and fabrication methods that preserve the design while meeting the project’s practical requirements.

Choose materials based on the complete application.

Material selection affects appearance, corrosion resistance, weight, formability, durability, cost, and compatibility with surrounding construction. Designers may also need to consider how a metal’s color, texture, reflectivity, and finish will coordinate with adjacent materials and whether its appearance will change with weathering. Thompson-Mathis Metal works with a variety of architectural metals, and the appropriate choice depends on the component’s intended use, exposure, dimensions, and design requirements.

Common architectural metal options include:

  • Galvanized and painted steel. Used for flashing, coping, fascia, panels, gutters, roof accessories, and other exterior components. Pre-finished products offer color and finish options that can coordinate with surrounding construction.
  • Aluminum. A lightweight, corrosion-resistant option for coping, fascia, flashing, panels, gutters, downspouts, and other specialty components.
  • Copper. Frequently selected for its appearance, durability, and traditional architectural applications, including flashing, gutters, chimney caps, dormers, and decorative features. Its appearance changes as it develops a natural patina.
  • Stainless steel and specialty metals. Suitable for applications requiring particular corrosion resistance, appearance, or other performance characteristics.

Material should be considered alongside the profile rather than treated as a finish decision made after the detail has been developed. Thickness, gauge, bend geometry, thermal movement, exposure, and surrounding materials can all affect the most appropriate choice. An experienced fabricator can help evaluate these factors and recommend materials suited to the project’s appearance, performance, and budget requirements.

Designing Architectural Metal for Fabrication and Installation

Architectural drawings establish how a component should look, fit, and perform, while fabrication determines how that design becomes a physical piece of metal that can be transported, handled, and installed. Coordinating these requirements early can help prevent complications when a detail moves from the drawing to the fabrication shop or construction site. Small adjustments to a bend, return, flange, length, or joint location can sometimes make a component easier to produce and install without compromising its intended appearance. This coordination is particularly valuable for long pieces, unusual profiles, complex transitions, and components that must match existing construction.

Two important details to coordinate early are fabrication length and seam placement, and the bends, corners, and transitions needed to bring the design together.

1) Fabrication length and seam locations.

The length a fabrication shop can form directly affects how many individual pieces may be required along an elevation. Shorter fabrication lengths can require additional joints, and every joint introduces another location that must be aligned, connected, and finished in the field. For architectural details where long, uninterrupted runs are important, fabrication capabilities can influence both the finished appearance and installation requirements.

Thompson-Mathis Metal can brake many flashing profiles in lengths up to 21 feet. Where the material, design, transportation, and installation conditions allow, longer fabricated sections can reduce the number of field seams and the labor associated with joining multiple shorter pieces. This capability can be particularly useful for fascia, coping, flashing, and other components where a long straight run is part of the design.

However, longer sections are not automatically appropriate for every application. Thermal movement, handling, access, and installation requirements still need to be considered. The advantage is having additional fabrication options available when fewer seams support the project’s requirements.

2) Bends, corners, and transitions.

A profile that appears simple in section may require several bends to produce. Material thickness, bend angles, hems, offsets, short returns, and tightly spaced bends can all affect how a component can be fabricated. The sequence of those bends may also become important when a profile is particularly deep or complex. Experienced fabricators can review a detail and identify areas where minor dimensional adjustments may make production more practical while preserving the intended appearance and function.

Corners, roof-to-wall transitions, parapets, penetrations, elevation changes, drainage points, and connections with other materials also deserve careful attention. These conditions typically require more planning than straight sections and can become difficult to modify in the field. Providing clear dimensions, elevations, and adjoining details allows the fabricator to understand how the components should fit together and whether special pieces need to be produced.

Where Custom Architectural Metal Adds Value

Standard metal components work well for many common construction details, but architectural projects do not always fit standard dimensions or profiles. Custom fabrication becomes valuable when a project’s appearance, performance requirements, or existing building conditions call for something that is not readily available off the shelf.

For architects and designers, custom fabrication provides greater flexibility in developing distinctive architectural details while maintaining consistency throughout a project. Flashing, coping, panels, drainage components, and roof accessories can be produced with project-specific dimensions, profiles, and finishes rather than requiring the design to accommodate standard products. This can be particularly valuable when metal components are highly visible or need to coordinate with other architectural features.

Thompson-Mathis Metal fabricates a wide range of custom architectural products, including:

  • Flashing, coping, and edge metal. Counter flashing, step flashing, valley and ridge flashing, roof penetration flashing, gravel stops, fascia, coping caps, parapet wall coverings, and custom profiles for unusual roof and wall conditions.
  • Wall and roof panels. Custom panels for architectural, roofing, and commercial applications, including project-specific lengths, profiles, and specialized shapes.
  • Gutters and drainage components. K-style, half-round, and custom gutters; round, square, corrugated, and decorative downspouts; elbows, scuppers, conductor heads, and collector boxes.
  • Specialty architectural components. Chimney caps, dormers, cupolas, roof vents, decorative features, custom covers, and other products designed around unique project requirements.

Our fabrication capabilities support everything from one-off custom pieces to larger production runs. We can also manufacture larger commercial drainage components, including 5-inch and 6-inch downspout elbows that may be difficult to source from standard suppliers.

Custom fabrication for renovation and restoration projects

Custom architectural metal is not limited to new construction. Renovation, restoration, additions, and repair projects may require new components that match metal already in place, particularly when the original profile is no longer commercially available. In many cases, Thompson-Mathis Metal can replicate existing flashing, coping systems, gutter components, roof accessories, and architectural features using drawings, field measurements, or an existing piece as a pattern. This allows contractors to replace damaged or deteriorated components while maintaining the appearance of the existing building and fitting the surrounding construction.

Working With an Architectural Metal Fabricator

Custom fabrication becomes more efficient when the fabricator has a clear picture of what the project requires. Complete information reduces the need to interpret important details after production has started and gives the fabrication team an opportunity to identify potential issues before material reaches the brake.

Depending on the component, architects and contractors should be prepared to provide:

  • Architectural plans, shop drawings, or sketches.
  • Component dimensions, profiles, and bend requirements.
  • Material, gauge, finish specifications, and color references or samples.
  • Required lengths and quantities.
  • Joint and seam requirements, including any preferences for visible seam locations.
  • Adjoining materials and installation conditions.
  • Field measurements, photos, or samples of existing components when applicable.

Not every project requires the same level of documentation. A straightforward flashing profile may need only dimensions, material, gauge, quantity, and length, while a complex architectural feature or transition may require additional drawings and coordination with surrounding construction. Providing enough information for the fabricator to understand how the piece fits into the project helps determine an appropriate production method and identify conditions that should be addressed before fabrication begins.

Thompson-Mathis Metal: Architectural Metal Fabrication Backed by Decades of Experience

Architectural metal details frequently have to satisfy several requirements at the same time. A component may need to maintain a particular appearance, protect the building from water, fit within tight dimensions, connect with another material, minimize visible seams, and remain practical for a contractor to install. Working with an experienced fabricator helps bring those requirements together when standard components are not enough.

For more than 60 years, Thompson-Mathis Metal has helped architects, roofing contractors, general contractors, and commercial construction teams turn project requirements into precision-built sheet metal components. Our 16,000-square-foot Dallas facility combines specialized fabrication equipment with experienced sheet metal professionals, including a team led by a master fabricator with more than 40 years of hands-on experience. From custom flashing and coping to wall panels, drainage systems, roof accessories, and specialty architectural components, we provide the craftsmanship, precision, and fabrication expertise needed to support projects of all sizes.

Contact Thompson-Mathis Metal today with your drawings and project specifications to discuss your custom architectural metal fabrication needs.

Partner With an Experienced Architectural Metal Fabricator

Since 1962, Thompson-Mathis Metal has worked with architects, designers, and contractors to produce custom architectural metal components. Share your drawings, dimensions, or specifications with our team to explore fabrication solutions for your next project.